belt lock extender 30 cm
€24.50 ex vat
30cm Seat Belt Buckle Extender
Introduction
The 30cm Seat Belt Buckle Extender from Seat Systems is a practical wire buckle/receiver designed for vehicle and specialist seating applications where additional reach or a more accessible buckle position is required. The flexible wire stalk allows the receiver to be positioned conveniently beside the seat while accommodating different installation angles.
With an overall length of approximately 30 cm, this buckle receiver is particularly useful where a standard short receiver is difficult to reach or where the mounting point is positioned further away from the occupant.
Designed for a wide variety of vehicle seating applications, it can be used in 4x4s, cars, buses, coaches, trucks, HGVs, forklifts, campervans and specialist vehicles, subject to the buckle, belt and mounting arrangement being compatible.
belt lock extender 30 cm Key Features
- 30cm Length – Extended wire buckle receiver provides additional reach where the vehicle mounting point is located further from the seat.
- Flexible Wire Stalk – Allows the buckle receiver to operate at different fitted angles for convenient positioning.
- Easy-to-Reach Buckle – Helps position the seat belt receiver closer to the occupant for easier connection and release.
- Bolt-On Installation – Designed for applications with a suitable mounting point for securing the receiver.
- Versatile Fitment – Suitable for a broad range of automotive, commercial, industrial and specialist seating applications when compatibility is confirmed.
- Replacement Seat Belt Component – Ideal for replacing an existing buckle receiver where the dimensions and buckle connection correspond.
- Suitable for Specialist Seating – A practical option for vehicle conversions and other seating installations requiring a longer buckle stalk.
- Multiple Vehicle Applications – Suitable for many passenger, commercial, agricultural and material-handling vehicles.
Applications
The 30cm seat belt buckle receiver can be used across a wide variety of vehicle and seating installations. Typical applications include:
- Cars and 4×4 vehicles
- Vans and commercial vehicles
- Trucks, lorries and HGVs
- Buses and coaches
- Forklifts and material-handling equipment
- Campervans and motorhomes
- Campervan rock-and-roll beds
- Specialist and utility vehicles
- Agricultural and industrial machinery, where the appropriate seat belt system and mounting arrangement are used
- Vehicle seat replacements and conversions
Important Compatibility Information
Although this buckle receiver is suitable for many different applications, seat belt buckles are not universally interchangeable. The buckle tongue must correctly match and securely engage with the receiver, and the mounting arrangement must be appropriate for the vehicle and restraint system.
Before ordering, check the buckle type, receiver dimensions, mounting hole, installation position and required length against your existing seat belt installation.
Because a seat belt is a safety-critical restraint system, installation should use a suitable structural seat belt anchorage and appropriate approved mounting hardware. A convenient bolt hole alone should not be assumed to be a safe seat belt anchorage. If you are uncertain about compatibility or installation, contact Seat Systems for technical assistance before fitting.
A Versatile Replacement Buckle Receiver
For vehicle owners, workshops, fleet operators and conversion specialists looking for a longer seat belt receiver, this 30cm wire buckle receiver provides a convenient and versatile solution. Its extended flexible stalk makes the buckle easier to position around different seats and interior layouts while providing a straightforward bolt-on configuration for compatible installations.
Whether required for a forklift, truck, 4×4, coach, campervan or specialist vehicle, the 30cm buckle receiver provides a practical replacement option when matched to the correct seat belt and approved anchorage system.
